第一，安装建筑物本身内，如阳台、雨篷上。利用阳台的栏杆净灯具隐蔽。这时注意墙面的亮度应有一定的变化，避免大面积相同亮度所引起的呆板感觉。
First, install the buildings themselves, such as balconies and awnings. Use the balcony railing net lamps to hide. At this time pay attention to the brightness of the wall should have a certain change, to avoid large areas of the same brightness caused by the inflexible feeling.
第二，灯具放在建筑物附近的地面上。这时由于灯具位于观众附近，特别要防止灯具直接暴露在视野范围内，更不能看到灯具的发光面，形成眩光。一般可采用绿化或其他配件加以遮挡。这时应注意不宜将灯具离墙太近。
Second, lamps are placed on the ground near buildings. At this time, because the lamps and lanterns are located in the vicinity of the audience, especially to prevent the lamps and lanterns directly exposed to the field of vision, let alone the luminous surface of the lamps and lanterns, forming glare. Generally, greening or other accessories can be used for shelter. It should be noted that lamps should not be too close to the wall.
第三，安装在路边的灯杆或专门的支架杆上。这特别适用于街道狭窄、建筑物不高的条件。
Third, mounted on the roadside lamppost or special support rod. This is especially suitable for conditions such as narrow streets and low buildings.

第四，放在邻近或对面建筑物上。主要是考虑自身建筑物安装有难度，周围环境与场地受到限制，这种情况下就可以考虑灯具安装在其他建筑物上。
Fourth, put it on adjacent or opposite buildings. Mainly consider the difficulty of their own building installation, the surrounding environment and site constraints, in this case can be considered to install lamps on other buildings.