户外照明灯具是用在室外的灯具，例如，公园、广场、马路两边以及户外广告用灯。要求满足室外视觉工作需要和取得装饰效果。
Outdoor lighting lamps are used for outdoor lamps, such as parks, squares, roadsides and outdoor advertising lights. It is required to meet outdoor visual work needs and obtain decorative effects.
灯具说明：灯盘骨架采用优质型钢制成，经热镀锌处理，紧固件螺栓、螺母为不锈钢。
Lamp Description: the lamp frame is made of high quality steel and is galvanized. The bolts and nuts of fasteners are stainless steel.
特别说明：灯具必须防锈，安装时必须保证灯体安全接地。
Special Description: lamps and lanterns must be rust protected. The installation of lamps must ensure that the lamps are safely grounded.
户外照明特点：与家居照明相比，户外照明有功率大、亮度强、体积大、使用寿命长、维护成本低等特点。户外照明控制分为：手动控制、光控、时间控和电脑控制。
Outdoor lighting characteristics: compared with home lighting, outdoor lighting has the characteristics of large power, strong brightness, large volume, long service life and low maintenance cost. Outdoor lighting control is divided into manual control, light control, time control and computer control.
1、道路灯
1. Road lights
适合场所：公路，立交桥，停车场，体育场，货场，港口，机场及市民休闲广场等。
Suitable places: highways, overpasses, parking lots, stadiums, freight yards, ports, airports and public leisure squares.
特点：造型美观，具有很强的装饰性，照明面积大，照明效果好，光源集中，光照均匀，眩光小，易于控制，维修。
Features: beautiful shape, strong decorative, large lighting area, good lighting effect, light source, uniform light, small glare, easy to control, maintenance.
灯杆，一般都是用锥管，材质为：上海宝钢Q235A碳素钢材简称Q235钢材，Q235就是钢材的一个型号，每个型号的钢材除了铁都包含不同元素，不同的钢材的它硬度都是不同的，价格也是相差很多的，比如45#王牌刚，D2钢材，S136高速钢NAK55，NAK80 ，NAKH-9等，由6元/KG-600元/磅，Q235作为最普通的钢材，价格便宜，硬度低，延展性好，比较好加工，锥管都采用这种材质多。
Lamppole, generally use cone pipe, is made of cone tube, material is: Shanghai Baosteel Q235A carbon steel for short Q235 steel, Q235 is a model of steel, each type of steel except iron contains different elements, the hardness of different steel is different, the price is different, such as 45# brand new, D2 steel, S136 high-speed Steel NAK55, NAK80, NAKH-9 and so on, from 6 yuan /KG-600 yuan / pound, Q235 as the most common steel, low price, low hardness, good ductility, better processing, taper pipe use this material more.
灯杆制作前需要确认款式及以下问题：
The style and the following questions need to be confirmed before making the lamppost:
1. 灯杆的高度。（单位：米）(一次性成形的高度可以做到3-12米高，超15米-35米的锥管要分2-4节做）
1. the height of the lamp. (unit: m) (height of one-step forming can be 3-12 m high, 15 m -35 m, cone tube should be divided into 2-4 sections).
2. 灯杆上口径和下口径有没有客户特殊要求。
2. there is no special requirement for the upper and lower caliber of the lamppost.
3. 灯杆的厚度有没有客户特殊要求。（单位：毫米）（常规：3-12米厚度为3-4mm，15-35米的锥管厚为5mm.6mm.8mm.10mm.12mm14mm）
3. lamppost thickness has no special requirements for customers. (unit: millimeter) (conventional: 3-12 m thickness 3-4mm, 15-35 m conical tube thickness 5mm.6mm.8mm.10mm.12mm14mm)
4. 灯杆法兰盘（底盘、底板）：是否有客户特殊孔距要求，是否有客户特殊厚度要求。
4. light pole flange (chassis, floor): whether there is special customer spacing requirements, whether there is a special thickness requirements of customers.
5. 灯杆支臂：伸出的长度是否有客户特殊要求，是否要做活动，是否有灯具距地面的高度，如不要灯具，（即路灯头），需要知道客户灯具的套头是多大的，配套生产。
5. lamppost arm: whether the length of the extended customer special requirements, whether to do activities, whether there is the height of the lamp from the ground, such as no lamps and lanterns, (that is, the road lamp), need to know how big the set of lamps and lanterns, matching production.
6. 灯杆防锈方式：1.热镀锌防锈处理（15-30年不生锈）；2.冷镀锌防处理（3-5年不生锈）。按客人要求做热镀锌或冷镀锌。
6. lamp pole anti rust method: 1. hot galvanizing anti rust treatment (15-30 years without rust); 2. cold galvanizing treatment (3-5 years without rust). Hot-dip galvanized or cold galvanized according to the requirements of the guest.
7. 灯管表面颜色：1.喷户外粉（2年不粉化）；2.喷氟碳漆（3年不掉漆）按客人要求做喷粉或喷氟碳漆，还有是否要做分色处理。
7. light tube surface color: 1. spray outdoor powder (2 years non powdery); 2. spray fluorocarbon paint (3 years do not drop paint) in accordance with the requirements of guests to do powder or spray fluorocarbon paint, and whether to do color separation.
8.是否要含配套的地笼，（如果不需要，需要客户自行提供孔距。不然做好后出货过去对不上孔距就装不上去的）
8. do you need to have matching cages? (if you don't need them, you need to provide the distance from customers. Otherwise, after shipment, it will not be able to be loaded without holes.
9. 是否要含光源，(如果要含光源，需知客户有没有特殊要求装指定的光源，有LED，节能灯，高压钠灯，金卤灯源，与及光源的品牌要求，瓦数要求等等 。
9. is the source of light, (if you want to contain a light source, you need to know if the customer has special requirements for the specified light source, LED, energy saving lamp, high pressure sodium lamp, gold halogen lamp source, and the brand requirements of the light source, tile requirements and so on. "
10.接线门一般用数控线切割割门，也可按客人要求的尺寸制作，如接线门距地面的高度。
10. the wiring gate is usually cut by numerical control wire, and can also be made according to the size required by the guests, such as the height of the connection door from the ground.
